Enhanced DRB III Emulator

Overview

The DRB III™ hardware device is a handheld diagnostic tool that preceded the Next Generation Service Tool (NGST) family of service tools in FCA dealerships.  This tool was introduced in 1994 and can no longer be manufactured in its current form due to parts obsolescence.  Most of the software for the DRB III has been deployed in the Enhanced DRB III Emulator.  The DRB III Emulator does not include the functionality that was on some PCMCIA cards that were deployed for the original DRB III.  The new Enhanced DRB III Emulator is to replace the need for the original DRB III Emulator and include the following PCMCIA based application cards of the DRB III:

  • CH8425- Two door Sebring/Stratus Coupe
  • CH9087 – Sprinter
  • CH9044 – Crossfire
  • CH8361 – Supercard 2 (all vehicles with a J1962 connector through 1997 model year)

The devices to be supported by the New Enhanced DRB III Emulator will include the following:

  • microPod II

Although the DRB III required the use of additional cables, the microPod II will not require any additional cables.

In order to get the new Enhanced DRB III Emulator you must have the following:

  • microPod II
  • Enhanced DRB III Emulator Entitlements
  • Latest version of the wiTECH Diagnostic Application (wiTECH 1.0)

Please reference the attached supported vehicle list

Attachments (1)
Related Articles RSS Feed
2nd - Setup a VCI for wiTECH 2
Viewed 175 times since Fri, Oct 9, 2020
How-to Configure a Wireless Profile on a microPOD 2
Viewed 167641 times since Fri, Feb 5, 2016
Road Test - How-to
Viewed 27382 times since Thu, Jan 14, 2016
wiTECH Bandwidth Requirements
Viewed 4480 times since Wed, Jun 27, 2018
wiTECH 1 / DRB III Enhanced Emulator Dealership Requirements
Viewed 11065 times since Fri, Jan 26, 2018
Chrysler Scan Tool Flash Availability Document
Viewed 41667 times since Wed, Jul 19, 2017
3rd - Configure Wi-Fi on a VCI
Viewed 213 times since Fri, Oct 9, 2020