Road Test - How-to
For Dealerships ONLY
Q: Since wiTECH 2.0 requires an active internet connection, how do I complete a road test?
*Note: If your Vehicle Communication Interface (VCI) device is not already connected to a network or is out of range of a saved network, you will want to make sure the VCI Setup Utility is open in the background. Open the VCI Setup Utility and leave it open until you connect the VCI to a wireless network. When you have finished setting up the wireless profile, click “Cancel” to close the VCI Setup Utility.
A: Road testing with wiTECH 2.0 can be completed using a cellular hotspot device by performing the following steps:
For detailed steps, please see the following KB: How to Configure a microPOD for a Mobile Hotspot
See the following for the video form of this article: Video - How-to use wiTECH 2.0 on a Road Test / Hotspot
|Posted: Chris Ordner - Thu, Jan 14, 2016. This article has been viewed 33890 times.|
|Online URL: https://kb.fcawitech.com/article/road-test-how-to-274.html|
Powered by PHPKB (Knowledge Base Software)