TechTOOLS Memory Card update error is received

DESCRIPTION

The following memory cards are used with the DRBIII (Diagnostics Readout Box):

  • Supercard 1
  • Supercard 2
  • Sebring Stratus 2 Door (ST22)
  • Dodge Sprinter NAFTA
  • Crossfire

If error message is received while updating any of the above cards then the following troubleshooting steps should be followed:

  1. Remove and re-insert Memory Card from DRBIII
  2. Insure write-protect switch on card is set to Un-Protected (Off) position (See picture below)
  3. Redo Memory Card update
Posted: Chris Ordner - Fri, Apr 14, 2017. This article has been viewed 1214 times.
Online URL: https://kb.fcawitech.com/article/techtools-memory-card-update-error-is-received-668.html

Powered by PHPKB (Knowledge Base Software)