TechTOOLs Indicating That the DRBIII Is Full When Loading Flash File (Red Bar in the Lower Left of Screen)

When running the TechTOOLS Application and trying to load a flash file to the DRBIII, in some cases TechTOOLS indicates that there is no more available space on the DRBIII with a red bar in the bottom left portion of the screen.

 

Models Affected:

AB - Ram Van/Wagon JA - Breeze LH - Vision PR - Prowler
AN - Dakota JA - Cirrus LH - LHS PT - Chrysler Cruiser
BE - Ram Pickup/Quad Cab JA -Stratus LH -Intrepid RS - Caravan, Voyager, Town and Country
BR - Ram Pickup JR - Sebring/Stratus Sedan LH - Concorde TJ -Wrangler
CS - Pacifica JR - Sebring Convertible LH - 300M WJ - Grand Cherokee
DN - Durango KJ - Liberty NS - Caravan, Voyager, Town and Country XJ - Cherokee
DR - Ram Pickup LH - New Yorker PL - Neon ZB - ViperCoupe/Roadster
FJ - Avenger, Sebring      

 


Years: 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, 1997, 1996, 1995, 1994, 1993, 1992


System or Component: Group 08 - Electrical, Group 18 - Vehicle Performance /Driveability, Group 21 - Transmission / Transfer Case / Power Transfer Unit ( AWD ), Group 24 - Climate Control - Heating / Air Conditioning

 

Recommendation: 

  • It is recommended to first "COLD BOOT" the DRBIII by pressing the "YES" and "MORE" keys at the same time, then pressing "F4" to continue. Performing this operation will erase any stored flash files on the DRBIII.
  • In some cases this may not correct the problem. If this is the case perform the following proceedure:
  1. Close the DealerCONNECT application
  2. Select the Start Menu
  3. In the "Search programs and files" line, type C:/program files
    • You may have to change settings to show all files as they may be hidden
  4. Find the directory named "DTO," right-click on it, and Delete the folder
  5. Close all windows and restart the DealerCONNECT/TechCONNECT/TechTOOLS applications
  6. Upon starting the TechTOOLS application, TechTOOLS files will be reloaded
  7. When TechTOOLS has finished loading, connect the DRBIII. A green bar indicating there is space available in the DRBIII should appear. At this time the flash file can be loaded.

NOTEAll prevous data recordings will be deleted by this procedure.

Posted: Will Flickema - Mon, Apr 23, 2018. This article has been viewed 4659 times.
Online URL: https://kb.fcawitech.com/article/techtools-indicating-that-the-drbiii-is-full-when-loading-flash-file-red-bar-in-the-lower-left-of-screen-867.html

Powered by PHPKB (Knowledge Base Software)