How to Configure Wireless Settings on a microPod II Setup for Enhanced DRB III Emulator

---

1. On a PC with the wiTECH application installed connect the VCI Pod/microPOD with a USB cable and enter IP “172.22.22.22” into the address bar of an Internet browser.
2. Select  Wireless Settings  in the menu on the left.
   
3. Select  New  and enter the name of your profile that you are creating and select  ADD.
   
   
4. In the  Se c u r i ty Settings  field enter the  wiTECH Network

• SS I D
• Se c u r i t y :  WPA or WPA2 PSK
• Enter Key:
• C on firm Key:

5. Select  Save   at the top of page
   
6. Select  Close  on the next page
7. Select  Manage Networks  in the menu on the left.
   
   
8. Select radio button for the wireless interface.
   
9. Next to the profile that was just created select the  Select & Start  button
   
10. Select  Close  on the next page
11. Once the connection is complete you will see an IP address populate for the wireless interface
    

• In some cases you may need to select the refresh button

---

Article Number: 832
Posted: Fri, Apr 13, 2018
Last Updated: Wed, Aug 27, 2025
Posted: Will Flickema

Online URL: https://kb.fcawitech.com/article/how-to-configure-wireless-settings-on-a-micropod-ii-setup-for-enhanced-drb-iii-emulator-832.html