Chrysler (J6.01) J2534 Application Manual

  • Vehicle manufacturers are required to provide a Windows software application for reprogramming emission-related ECUs using a J2534 capable interface. 
  • A J2534 device plugs into the vehicle OBD connector and connects to a computer running a J2534 compliant reprogramming application. 
  • For Chrysler vehicles, a TechAuthority subscription is necessary to install the J2534 application and download flash files.  
  • The J2534 System is a combination of the Chrysler J2534 Flash Application and the New J2534 Application.
  • J2534 aftermarket users are required to and responsible for installing the J2534 device driver provided by the device manufacturer.  
  • If you need support installing the device driver software, contact your device manufacturer.
  • The J2534 Manual attached below provides users with detailed information regarding downloading, installing, launching, and supporting the J2534 application. 
Attachments (1)
Related Articles RSS Feed
FCA US Verified J2534 Devices
Viewed 6546 times since Fri, May 19, 2017
Unable to download ECU re-programming flash files from TechAuthority
Viewed 16386 times since Wed, May 17, 2017
J2534 Flash Availability Document
Viewed 70744 times since Wed, May 17, 2017
J2534 Application Error 1609
Viewed 2479 times since Wed, May 17, 2017
J2534 Supported Vehicles
Viewed 8035 times since Wed, May 17, 2017
Registering a J2534 Device In Account Manager
Viewed 10196 times since Tue, May 30, 2017
Status Messages in J2534 Application
Viewed 2184 times since Fri, May 19, 2017
wiTECH 2.0 J2534 PC Requirements
Viewed 1314 times since Fri, Mar 15, 2019
Launching Chrysler J2534 Flash Application From wiTECH 2.0
Viewed 3866 times since Tue, Feb 26, 2019